|ELECTRONIC LUMATEK BALLAST 250 WATTS|
SUPERLUMENS SWITCH INCLUDED
More lumen output
up to 30% more lumens output than some old style magnetic ballasts ...More light equals more yield. We urge you to test this yourself with a good quality light meter. Be sure to also check how much power the ballast is using with an ammeter as many so called 600w magnetic ballasts now draw up to 750w as standard to try to keep up with Lumatek's lumen output.
More lumens generated per watt of electricity consumed
Lumatek ballast have increased efficacy over magnetic ballasts. They lose fewer watts from the power supply to the lamp. The high frequency output results in low power loss at the cathodes in addition to better overall power management.
Stable light output
E xcellent for Pharmaceutical-agriculture, laboratories and other uses where precise regularized output is essential.
It reaches full brightness in under one minute; magnetic ballasts typically take about twenty minutes.
No noise or vibration of any kind
Small compact design
600watt 120v ballast weighs less than 4.5 kilos compared to almost 20 kilos for magnetic ballasts.
Produce less heat
Less heast generated by the ballasts allows cooler running of the environment
Cuts off when a short is detected. For ultimate safety .
Longer bulb life
Lumen output loss over time, with the correct lamp, is dramatically less than with magnetic ballasts.
Lumatek ballasts can light both HPS and MH bulbs (excluding the 750w which is HPS only).